How much does a Refrigeration Engineer cost in Barry?
Typical costs for hiring a refrigeration engineer in Barry, Wales. Refrigeration Engineers pricing is largely consistent across the UK, so the figures below are indicative national ranges. Your actual quote depends on job size, access and materials, so always get 2–3 quotes.
Refrigeration Engineer price guide, Barry
| Job type | Price range | Notes |
|---|---|---|
| Call Out Fee | £50 – £120 | higher in London |
| Labour Rate | £60 – £80/hour | outside London |
| Fridge Freezer Regas | £60 – £200 | domestic fridge freezer; F-Gas engineer required |
| Thermostat Replacement | £75 – £140 | parts and labour |
| Door Seal Replacement | £90 – £140 | parts and labour |
| Circuit Board Replacement | £220 – £365 | parts and labour |
| Compressor Replacement | £440 – £640 | parts and labour |
Price ranges sourced from MyJobQuote, Fridge Freezer Repair Costs in the UK | 2026 Price Guide (updated 11/07/26). Cost data across all trades was last updated 22 September 2026. Actual quotes vary by job complexity, access and contractor.
Need a refrigeration engineer in Barry?
Tell us what you need, we'll match you with available local businesses, free.
Or browse all Refrigeration Engineers in Barry →
Frequently asked questions
Do fridge engineers charge a call-out fee?
Usually, yes. The average call-out charge is £50 to £120, and engineers typically charge £60 to £80 an hour outside London, though most give a fixed quote once the fault is diagnosed.
How much does it cost to regas a fridge freezer?
Regassing a domestic fridge freezer costs £60 to £200, depending on the model and refrigerant. It is only needed if there is a refrigerant leak, and a leak often returns, so it can be a temporary fix.
How much does a new compressor cost?
A compressor replacement costs £440 to £640 including parts and labour, and can take 3 to 4 hours. Simpler faults such as a thermostat (£75 to £140) or door seal (£90 to £140) often take under an hour.
What should I check before hiring a refrigeration engineer?
Any repair involving refrigerant gas must legally be carried out by an F-Gas qualified engineer, so check the engineer or company is registered with an F-Gas scheme such as REFCOM.